Corrosion Protection

Approx. Rs 1,550 / PieceGet Latest Price

Product Details:

ColorMixing ratio by volume

Blue:

3:2 by v/v

Black:

2:1 by v/v

Silver:

6:1 by v/v

Gold:

6:1 by v/v

Transparent:

4:1 by v/v

UltraCorr ACX 4000Direct to metal anti-corrosive nano-coatingProduct Description
ULTRACORR ACX-4000 is a specially designed room temperature cured two component organic-inorganic hybrid materials having well-combined properties of nanosize inorganic particles and sub-micron size metallic pigments dispersed in hybrid polymeric binders to offer an inhibiting as well as sacrificial protection of metals against corrosion. The coating on cross-linking produces a mechanically robust tough film with excellent anti-corrosive properties. This coating has also excellent chemical resistant properties.
Typical Applications

Direct to metal application (Galvanized Steel. Phosphate steel. Carbon steel, Copper, Aluminium)

Heat Exchanger and cooling units

Copper U tubes

Metal structures and components

Industrial plants and machineries

Benefits & Advantages

Thin film direct to metal application

Provides excellent anti-corrosion performance in any harsh environment

Provides sacrificial and barrier protection

Excellent adhesion and film hardness

Dissipates heat o Excellent adhesion and flexibility

Excellent heat and weather resistance

High abrasion resistance

Good resistance against chemicals, acids and alkaline cleaners

Easy to apply by brush, roller, conventional or airless spray

Can be applied at both industry or at site

Easy to use at shop floor

Application GuidelineSurface Preparation:

Apply only when temperatures are between 10^oC and 50^oC.

Remove dirt, grease, oil and other contaminants.

Remove blistered or loose rust scale by machine grinding, manually by sand paper or with metal shrapnel’s and steel wire brush.

Mixing:

Stir the component A and component B parts separately before mix them together

Mix hardener gradually into the base container (not the reverse) under continuous stirring.

Always mix the full quantity as supplied to avoid improper curing issues.

Continue the mixing for 3-5 minutes. Allow induction time of 15-20 minutes and then thin down to applicable consistency with required quantity of thinner.

Mix thoroughly till the components become homogenous.

Can be applied with brush, roller, conventional air assisted or airless spray.

Clean all painting equipment immediately after use with thinner.

Precautions:

Don’t apply materials below dew point and above 50^oC.

Avoid rain during application till the surface is dried.

Use proper protective equipment while handling.

Avoid direct contact with skin and eyes. In case of contact wash thoroughly with plenty of water and Consult physician if necessary